FEATURE
Built-in 32 bits IPC, ensure the best situation stability when processing.
Chinese & English display.
Metric & British system display & program setting.
1,000 stations processing programs.
Simplify the program editing; with one block command, you can finish the line multi-cavity machining and
matrix multi-cavity machining.
10 files, and there are 256 sets processing parameter memory in each file; it can store the processing conditions.
Single or 3 axes lateral processing, round orbiting, square orbiting, vector, sector processing, C axis (including
the helical-gear machining, C-X/C-Y axes lateral RACK machining, and other applied machining commands),
and ATC.
Automatically edge approaching, HOME finding, center of inner-hole finding, center of outer-hole finding, and
APEX finding.
Mirror Processing (Big Dimension) Controller Advantage
JSEDM original creation, S.F(Super Finishing), mirror processing circuit.
DSP (Digital Signal Processors) servo Control system speeds the response time up to 0.2ms in a location circuit control versus. (Traditional PC based control is 1ms in a versus.) DSP provides the more stable sparking and smooth machine movement.
MOSFET transistors couple with responsive POWER SINK circuitry can reach the high processing with low wear and tear rate.
Pulse circuit adopts the IC of FPGA, the latest generation of field programmable gate array, to ensure the fastest response and capability of "UNI-PULSE" monitor, thus ensure the better burning efficiency by "avoiding" carbon built up. (Less ARC condition.)
Operator friendly Interferes with "AI" logic to assist in setup and operation. Once the basic material, depth, and shape data are entered, the CNC fuzzy logic controller can set and adjust the optimum burning parameters to quickly and efficiently achieve the targeted results.6. Industrial DOM (Disk On Module), which can be wrote and read over 100,000 times at least.
|
Machinery Specification
|
Generator Specification
|
Fluid Tank
|
|
Capacity of
work tank
|
1100x600x400 mm
( 43.3x23.6x15.7 inch )
|
Max. output current
|
60A
|
90A
(optional)
|
370 L
|
|
Work table dimension
|
700x400 mm
( 27.6x15.7 inch )
|
Input electric power
|
7KVA
|
10KVA
|
|
Longitudinal travel
( X axis )
|
400 mm
( 15.7 inch )
|
Max. processing speed
|
400
mm3/min
|
600
mm3/min
|
|
Cross travel
( Y axis )
|
300 mm
( 11.8 inch )
|
Electrode wear ratio
|
0.12%
|
|
Spindle travel+
Headstock travel
( Z axis )
|
300 mm
( 11.8 inch )
|
Best surface finish
|
Ra 0.2 µm
|
|
Available loading weing of electrode
|
100 kgs
( 220 lbs )
|
Max. programming capacity
|
1000 block
|
|
Loading capacity of work table
|
1500 kgs
( 3300 lbs)
|
Min D.R.O. resolution
|
0.001mm
|
|
Machine weight
|
2000 kgs
( 4400 lbs)
|
Max. D.R.O. exent
|
999.999mm
|
|
Machine DIM
( LxWxH ) / S.F
|
3017x1649x2310 mm
(118.8x64.6x90.9 inch )
|
Permanent memory device
|
-
|
|
Machine DIM
( LxWxH ) / EB600L
|
2387x1585x2310 mm
(94x62.4x90.9 inch )
|
|
-
|
|
Clearance from worktable to
( min - max )
|
320 ~ 620 mm
( 12.6 ~ 24.4 inch )
|
-
|
-
|
Note: The data above is the test result base in certain working condition. The actual result will be varied depends in the input voltage,shape and size of electrode,spark condition,material of work piece and working fluid.
Note: Specification is subject to change without notice.
*Specification1; Specification2;
